Means & Methods Lab, home
Facts: desk research from vendor sites · Reviews: members' opinions

Origin vs Dusty Robotics

Two indoor jobsite robots for building work that do different jobs, so this is not like-for-like (our reading). Origin's OG-1 is an autonomous multi-trade robot that the vendor says currently does wall finishing (joint compound, sanding and priming), with swappable tools and remote operators who can step in. Dusty Robotics' FieldPrinter prints multi-trade BIM layout directly on the floor from Revit and AutoCAD. Neither publishes prices; Dusty describes usage-based pricing by days of layout used. Desk research from vendor sites read Nov 8, 2026; no winner.

DESK RESEARCH FROM VENDOR SITES. Compiled from vendors' public websites (accessed Origin Nov 18, 2026; Dusty Robotics Nov 19, 2026). Vendor claims are not verified by Means & Methods Lab. No scores or rankings.

In short: Origin (Construction robotics; no public prices (quote / sales)) vs Dusty Robotics (Layout robotics; no public prices (quote / sales)). Facts last checked Origin Nov 18, 2026; Dusty Robotics Nov 19, 2026. No winner declared; desk research from vendor sites.

Side by side

Origin vs Dusty Robotics: vendor-published facts side by side
Sheet rowOriginDusty Robotics
CategoryConstruction roboticsLayout robotics
AI role (our label)AI-firstNot AI-first
What it doesAutonomous multi-trade robot ("one robot, any trade"; homepage headline Physical AI for the built world) with a modular tool system and simulation-trained autonomy for interior finishing; the footer names Artila Robotics Inc. The product page introduces the OG-1 robot: a 30 by 35 inch footprint, camera and LiDAR sensing, reach up to 14 feet, a wheeled base, and a swappable tool station and end effector. It describes a Construction Action Model trained in simulation and on robot and teleoperation data from job sites, with remote operators who can intervene and whose corrections train the model, and lists joint compound (L4/L5), sanding and priming. A company blog post dated Oct 15, 2026 says Origin emerged from stealth with $20 million in total funding co-led by Accel and Zacua Ventures; that OG-1 currently completes wall finishing (compound, sanding, priming) autonomously, uses real-time force control for sanding and works alongside crews without a cordoned-off area; and it names taping, drywall installation, drilling and conduit installation as planned trades, planned pilots in the U.S. and Europe (Germany, Sweden, France and Saudi Arabia) and a target of 150 robots deployed by the end of 2027 (company plans, not verified). The homepage says it is designed to move through doors, work around site constraints and support workflows across different building types, without naming specific building types. Area, hours, speed, quality, margin and cost figures are vendor claims and are not used.FieldPrinter robot that prints multi-trade BIM layout directly on the jobsite floor, with native Revit and AutoCAD integrations. The FieldPrint Platform includes the Dusty Portal, FieldPrinter 2, an iPad app and an AutoCAD plugin. A rebuilt Dusty plugin for Autodesk Revit (generally available Nov 11, 2026, per Dusty's blog) exports a 2D plan view straight to the Dusty Portal with no DWG export or AutoCAD cleanup, maps Revit categories to print layers, offers a choice of coordinate system and shows a print-time estimate before upload; it runs on Revit 2022 through 2027, installs from the Autodesk App Store and is included at no additional cost for Dusty customers, while control points and MEP points still come in as CSV files; the platform page mentions AI-driven computer vision and obstacle avoidance, but the homepage describes robotics and model coordination rather than AI, so we tag it Not AI-first. Available in North America. Throughput, accuracy, obstacle-clearance and case-study figures are vendor claims not used here, and customer quotes are not used.
Who it's forContractors with finishing work.General contractors and trade contractors doing layout.
Pricing (as publicly stated)No public prices: the vendor site has no pricing or plans link, /pricing and /plans return a not-found page, and sales@origin.tech and a contact form are the routes. Confirm current pricing with the vendor.No public prices. The pricing page ("Simple pricing. Powerful solutions.") describes usage-based pricing by Daily Utilization ("only pay for the days you use automated layout on the jobsite"), plus Platform Access and Implementation, with additional plans for high-volume customers. All plans include the Dusty Robotics Portal, laser tracker, FieldPrinter robot, iPad and joystick, and support (vendor list). Implementation is listed as onsite operator training, virtual VDC training and self-serve Dusty Academy. Contact form, no figures. Confirm pricing with the vendor.
User reviewsNo reviews yet. Read or writeNo reviews yet. Read or write
Vendor links
Sources

Facts last checked: Origin Nov 18, 2026; Dusty Robotics Nov 19, 2026. Prices change; check the vendor page before relying on them.

Where the vendor descriptions differ

  • Not like-for-like: Dusty's FieldPrinter marks where work goes (layout printed on the slab from the model), early in a floor's sequence. Origin's OG-1 does finishing work on walls later in the sequence. A contractor could use both on the same project; neither replaces the other.
  • Hardware: Origin's product page lists a 30 by 35 inch footprint, camera and LiDAR sensing, reach up to 14 feet, a wheeled base and a swappable tool station and end effector. Dusty's FieldPrint Platform includes the Dusty Portal, FieldPrinter 2, an iPad app, a laser tracker and an AutoCAD plugin, with native Revit and AutoCAD integrations.
  • Autonomy and AI: Origin describes a Construction Action Model trained in simulation and on robot and teleoperation data from job sites, with remote operators whose corrections train the model. Dusty's platform page mentions AI-driven computer vision and obstacle avoidance, but its homepage describes robotics and model coordination rather than AI, so Dusty is tagged Not AI-first and Origin AI-first.
  • Trades and roadmap: Origin lists joint compound (L4/L5), sanding and priming today, and its Oct 15, 2026 blog post names taping, drywall installation, drilling and conduit installation as planned trades and planned pilots in the U.S. and Europe (company plans, not verified). Dusty lists multi-trade layout for general and trade contractors and says it is available in North America.
  • Pricing (Origin read Nov 8, 2026; Dusty from its Nov 8, 2026 entry): neither lists prices. Origin has no pricing or plans page and routes to sales@origin.tech and a contact form. Dusty's pricing page describes paying for the days you use automated layout on the jobsite, plus Platform Access and Implementation, with plans including the portal, laser tracker, FieldPrinter, iPad, joystick and support; figures are by contact. See each tool page for detail.
  • Not used here: area, hours, speed, accuracy, throughput, quality, margin and cost figures, funding-round details beyond what each tool page states, deployment targets and customer quotes (vendor material). Facts for both tools come from vendor websites (desk research).

Paraphrased from the sources listed above. Vendor claims are reported as claims.

What users say

The facts above come from vendor websites. Whether either tool is any good for your work is something only people who use them can say. These are member reviews, all ratings shown, never edited or removed for being negative.

Used either of these? Share your take

Good or bad, an honest review from an estimator, PM or super helps the next team more than another vendor demo. You post under a handle; your email is never shown.

Questions to ask in your review

  • Whether your bottleneck is layout before trades start (Dusty) or wall finishing labor (Origin)
  • Whether Origin is taking projects in your region yet, and what Dusty's daily utilization rate would be for your floor plates
  • How each handles site constraints on your projects (crew access, floor conditions, power and connectivity)
  • What did you use it for, on what kind of work and project size?
  • How long did setup and training take, and who on your team did it?
  • What does it cost you in practice, compared with what the sales call said?

How reviews work: review guidelines and methodology. All reviews: reviews hub.

Related